Get in touch




NJ001

The FITEL NINJA NJ001 Hand-Held Single fibre Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra bend-insensitive fibers. With its low-profile, compact and ruggedized body, the NJ001 offers reliable splicing under harsh environmental conditions. The large battery capacity makes it possible to perform 100 splicing and heating cycles.


Combining portability, power, flexibility and field ruggedness, the NJ001 delivers fast and consistent splicing with outstanding mobility and optimal ease of use.

Enquire

Applicable Fibers SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653)
NZD (ITU-T G655), BIF/UBIF (Bend Insensitive fibre ITU-T G.657)
Cladding Diameter 125 µm
Coating Diameter 160 to 900 µm
Fibers Cleave Length 5 to 10 mm or 16 mm
Average Splice Loss SM: 0.05 dB, MM: 0.02 dB, DSF 0.08 dB, NZD 0.08 dB, BIF/UBIF: 0.05 dB
Splice Time 13 seconds
Heat Time 17 seconds (40 mm sleeve*1) , 20 seconds (60mm sleeve*1) (Pre-heat mode)*2
31 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Regular mode)*2
Splice Programs Max. 150
Heat Programs Max. 30
Automatic Heating Start Available
Applicable Sleeves 20/40/60 mm
fibre Holder Tight holder (Loose tube applicable) or Removal fibre holder system
Tension Test 1.96 N
Splice Return Loss 60 dB or more
fibre Image Magnification 58X
Splice Memory Max. 1500
Image Capture Capacity Last 100 images to be automatically captured + Up to 24 images to be stored permanently
Dimension 124W 161D 64.5H mm (not including rubber pad)
139W 176D 71H mm (including rubber pad)
Weight 970 g (with S946 battery)
Monitor 3.5 color LCD monitor
Propulsion (motor) 8 N (Designed value)
Data Output USB ver. 2.0 mini
Battery Capacity Typically 100 splice/heat cycles *3
Wind Protection Max. wind velocity of 15 m/s.
Operating Temperature -10 to 50C (without excessive humidity)
Storage Temperature -40 to 60C (without excessive humidity)
Humidity 0 to 95% RH (non-condensing)
Power Source AC input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any change of hardware

*1 - The heating time may vary depending on the type of sleeves

*2 - The first heating cycle after turning the power on can be longer than the standard heating time

*3 - The number of splicing and heating cycles the machine can perform with a fully charged battery at 20C in semi -auto splicing mode and regular heating mode. The number of cycles may vary depending on the battery status and operating conditions.

  • Standard Holders


  • We have a range of fibre holders that can be equipped with the NJ001 to handle most of your splicing needs.


  • Splicer Add-ons


  • There are a variety of product accessories we have that compliment our splicers and allow you to be more equipped for any situation.