S712T-010

  • Description

  • Specification


Our “tight holders” can hold any single fibre with a coating diameter between 100 and 1000µm. They can also be used to splice loose-tube fibre. The S712T-010 holders are ideal if you are splicing with a 10mm cleave length and are compatible with the following splicer models: S179, NJ001, S153, S123, S178. They are held in the splicer with screws, but can be easily removed.

These holders are sold as a pair only.

Unit 1 pair
Applicable fusion splicer FITEL S179A, NJ001, S153A and S123C
Applicable fibre Single fibre
Coating diameter of fibre 100 to 1000 [µm]
Fibre cleave length 5 to 10 [mm] (Coating diameter: 100 to 250 [µm])
10 [mm] (Coating diameter: more than 250 [µm])

S712T-016

  • Description

  • Specification


Our “tight holders” can hold any single fibre with a coating diameter between 100 and 1000µm. They can also be used to splice loose-tube fibre. The S712T-016 holders are ideal if you are splicing with a 16mm cleave length and are compatible with the following splicer models: S179, NJ001, S153, S123, S178. They are held in the splicer with screws, but can be easily removed.

These holders are sold as a pair only.

Unit 1 pair
Applicable fusion splicer FITEL S179A, NJ001, S153A and S123C
Applicable fibre Single fibre
Coating diameter of fibre 100 to 1000 [µm]
Fibre cleave length 5 to 16 [mm] (Coating diameter: 100 to 250 [µm])
16 [mm] (Coating diameter: more than 250 [µm])

S712S-250

  • Description

  • Specification

Our removable holders fit both in our splicers and our cleaver and therefore provide an easy way to transfer the fibre from one to the other. The fibres will be cut at exactly the correct length for splicing and loading fibre into the splicer will be easier, with less risk of damage to the fibre ends.

There are different removable holders for different sizes of fibres.

These holders are sold as a pair only.

Use the S712S-250 holders if you are splicing 250µm coating fibre.

Small Table with some Specs

S712S-500

  • Description

  • Specification

Our removable holders fit both in our splicers and our cleaver and therefore provide an easy way to transfer the fibre from one to the other. The fibres will be cut at exactly the correct length for splicing and loading fibre into the splicer will be easier, with less risk of damage to the fibre ends.

There are different removable holders for different sizes of fibres.

These holders are sold as a pair only.

Use the S712S-500 holders if you are splicing 500µm coating fibre.

Small Table with some Specs

S712S-900

  • Description

  • Specification

Our removable holders fit both in our splicers and our cleaver and therefore provide an easy way to transfer the fibre from one to the other. The fibres will be cut at exactly the correct length for splicing and loading fibre into the splicer will be easier, with less risk of damage to the fibre ends.

There are different removable holders for different sizes of fibres.

These holders are sold as a pair only.

Use the S712S-900 holders if you are splicing 900µm coating fibre.

Small Table with some Specs